CE Approved Inductive Contact Pressure Gauges
4" Inductive Contact Pressure Gauges - Standard models of IPG-100 series with German-made inductive contact devices are world-wide used. Check out the specs. and other model numbers on IPG-100 PDF, and Product Gallery for details.

Specifications:
Models: IPG-100, IPG-100-1, IPG-100-2, IPG-100-3
Type: Lower Mount, Back Mount, Lower Mount with Back Flange, Lower Back Mount with Front Flange
Pressure Ranges: Positive, Negative (Vacuum), Compound
Case: AISI SS304
Lens: Acryic or Glass
Pointer: Aluminum
Bourdon: AISI SS316
Movement: AISI SS430
Connection: Standard Brass, Optional AISI 316, 1/4" or 1/2" PT, NPT, PF
Wiring: Fixed Cable or Germany-Imported PG 13.5 Cable Box
Contact: High A(NO), Low B(NC), up to 4 Contacts
Accuracy: 1.0% F.S.
Engineering Units: psi, bar, kPa, MPa, kg/cm2, and etc.

Technical Data:
Electrical Version: DC Voltage, 2-wire to DIN 19 234 (NAMUR)
Nominal Voltage: 8 V=(Ri approx. 1K Ohm)
Operating Voltage: 5-25 VDC
Current Consumption: ≧3 mA (active face uncovered), ≦1 mA (active face covered)
Switching Accuracy: Approx. 0.5% of the full scale value
Ambient Temperature: -20°C to +70°C

NOMINAL DATA (SJ 2 N Slot Sensors):
Switching Point with Fe Test Plate: Approx. 60% Insert Depth
Repeatability Accuracy R: ≦0.01 mm
Switch Hysteresis H: 0.05 to 0.2 mm
Testplate (Min. Dimensions Fe and non Fe): 5 mm x 8 mm x 0.5 mm
Working Voltage: 5-25 VDC
Residual Ripple: ≦5%
Switching Frequency: 5kHz
Protection Class to DIN 40 050: IP 67
Permissible Shock and Vibration (To IEC 68-2-6 and IEC 68-2-27): Accel ≦30g, T≦11 ms, f≦55 Hz, a≦1 mm
Method of Connection (The cable has to be fastened permanently when ambient temperature is above 80°C): 0.5 m, Mini-Flat-Cable, 0.06 mm².

Models:
1) IPG-100: Inductive Contact, Explosion Proof (EX), up to 4 contacts offered.
2) IPG-100-1: Inductive Contact, Explosion Proof (EX), up to 4 contacts offered.
3) IPG-100-2: Inductive Contact, Explosion Proof (EX), up to 4 contacts offered.
4) IPG-100-3: Inductive Contact, Explosion Proof (EX), up to 4 contacts offered.

	IPG-100 Lower Mount		IPG-100 LBM with Front Flange		IPG-100-1 LM All SS Liquid-Filled		IPG-100-1 LM All SS Liquid-Filled
	IPG-100-2 LM All SS Liquid-Filled		IPG-100-2 LM All SS Liquid-Filled		IPG-100-3 LM All SS Liquid-Filled		IPG-100-3 LM All SS Liquid-Filled
	IPG-100 LM w/ Diaphragm FD-300		IPG-100 LM w/ Flanged Diaphragm		IPG-100 LM w/ Cable Box

> View E-Catalog Online Page 1                               > View E-Catalog Online Page 2
> E-Catalog Downloading                                          > Product Gallery

Stainless Steel 316 Ti Stem for long-lasting life span to be exposed under extreme conditions.		Important components make the accuracy accurate.